The past few years have seen a dramatic increase in the demand for solid-state drives (SSDs), especially in the industrial market. This is due to the many benefits that SSDs offer over traditional hard disk drives, including less power consumption, and greater resistance to shock and vibration. Solid-state drives are introduced to provide a higher storage facility for computers. This type of drive is enabling the user to reinforce the functionality of smart systems by handling massive data. These drives use flash memory such as MLC or 3D NAND for efficient data handling. Technology addicts are familiar with the importance of Industrial 2.5inch SSD in this era.
Longsys is continuously strengthening the SSD product line by launching many new versions for serving industrial and consumer applications. The basic design characteristics of SSD are advancing the storage industry standards. This kind of memory fixture uses no mechanical movements for reading and writing information.
· Following the Interface type SATA |||
· Available in various capacity combinations such as 32GB, 64GB, 128GB, 256GB, 512GB, or 1TB
· DRAM-less solution with 3D NAND flash memory
· Comes with Power-loss Safeguard Feature
The 2.5 inch form factor of SSD is introduced to fit different types of applications. The classic version of SSD is not efficient enough to deliver the exact high-speed functionality. To tackle present challenges, this 2.5 inch version is connected via a SATA interface is a suitable option that guarantees an ever-lasting performance and reliability. FORESSE team has brought up the next-gen version of industrial fixtures intended to support the heavy systems. With these industrial fixtures, now smart systems can easily handle the extreme working scenario of an industrial environment. The 2.5-inch fixture is designed with technologies such as predictive analysis mechanism and failure correction thus providing high-end data retention and security. It is one of the smart fixtures that are equipped with onboard temperature sensors and has wide temperature endurance ranging from-40 °C to 85° C.
This memory unit is employed with robust firmware and intelligent software to provide a high level of data management services. Each memory fixture is featured with sudden power loss protection high-complexity hardware circuits and quick error detection etc. The industrial 2.5inch SSD provides density options up to 1TB thus it is becoming a necessary electronic component for heavy systems. The enhanced capacity is leading to faster boot times which makes the application more flexible and bearable to extreme operating conditions. Additionally, FORESEE industrial 2.5inch SSD provides the fastest data transfer speeds, making it the ideal storage solution for demanding industrial applications. With a SATA III interface and a maximum data transfer rate, this model can easily handle the demanding data storage requirements.
The hard disk drive is the traditional memory device that works by moving disks to store data on magnetic platters. While the solid-state drive employs flash memory for storage. The read/ write rate is slower in hard disk drives as compared to SSDs. HDDs are considered to be the slow memory devices providing only a 200mb/s transfer rate. The flash memory of a 2.5inch SSD is one of the reliable memory versions that offer higher density storage. This version has a controller which provides a high level of data management and a premium-quality controller that determines the read/write speed of a device.
HDDs are greatly contributing to boosting the functionality of personal computers while a 2.5inch form factor SSD is suitable for handheld devices such as a laptop. Its extreme tolerance ability is strengthening heavy smart systems such as industrial PCs, rail transportation systems, industrial IPCs, electricity systems, vehicle cameras, medical systems, POS machines, data centers, etc.
This memory chip utilizes the independent firmware developed by the efforts of the Longsys R&D team to maintain product stability, flexibility, and quality parameters. The development of in-house firmware and high-tech algorithms are making our products more durable than others in the market.
It is built by using a smart frame loss technology that maximizes the processing of junk data and contributes greatly to the smooth operation of applications. In the case of multi-channel scenarios, this device is coded to optimize the random read/write performance for reinforcing the working of a system.
The chip comprises numerous smart technologies that provide a high level of data retention facility and also it has emergency power failure protection that retains the data. Bad block management and free block acceleration also contribute to the efficient processing of data.
Each SSD product goes through a series of tests and subtests to validate the product's reliability and longevity. The product is tested at each phase such as hardware level and software level tests. The performance test is conducted to evaluate the functionality of each memory item. A power cutoff test is conducted to check the products’ stability in case of emergency power loss. To work smoothly in an industrial environment, the products go through a wide temperature test for determining the behavior of the product in extreme working scenarios. Similarly, FORESEE has a wide list of tests that ensures the reliability of each product.
The main reason to choose an industrial 2.5 inch SSD is due to its durability and longevity. Industrial applications are playing a significant role in turning the world into a digital world. FORESEE technical team is constantly researching to provide a better version of industrial solutions. It is on its way to offering solutions that are featured with higher storage densities, rugged designs, longer life spans, and more intelligent technologies to overcome the growing challenging of the enterprise environment.
Previous SLC Parallel NAND Flash: A Comprehensive Overview 2022.10.18
Next What is SPI NAND flash? 2022.10.26